lookupobd
Diagnostic Trouble Code
P0265

Cylinder 2 Injector Circuit High

Technical Description P0265

Cylinder #2 Injector Circuit High

What Does This Mean P0265?

This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model.

Trouble code P0265 is a generic code (common to all manufacturers) denoting an above average current draw from the fuel injector servicing the number two cylinder.

The cylinder #2 injector is operating poorly or not at all due to a problem within the circuit. It may be noted that although this code is common to all vehicles, the prognosis may vary between manufacturers.

For example, they may have been experiencing problems with a batch of fuel injectors, or some other defective item within the circuit limited to their particular vehicles.

This type of problem is better addressed as soon as possible to prevent damage to other internal components. A bad fuel injector will effect the spark plug, cause detonation, effects the oxygen sensor and catalytic converter, and several other components as well.

Go online and access the technical service bulletins (TSBs) for your specific vehicle. Look for any TSBs relating to P0265 and their suggested repair procedure.

Cross-section diagram of a typical automotive fuel injector (provided by WikipedianProlific):

Symptoms P0265

1 The malfunction indicator light will illuminate and code P0265 will set
2 The engine will run rough at idle
3 The fuel economy will suffer
4 There will be a lack of power indicated by poor acceleration

Possible Causes P0265

1 Faulty electrical harness from the PCM to the injector
2 Faulty electrical connector on the fuel injector
3 Internally shorted fuel injector causing a high-voltage draw
4 Plugged or dirty fuel injector